+40 735 886 201
oursupport.com

755

Ryobi

  • 1341409
  • 2007
  • Polonia
  • Masini de tipar
  • Masini de tipar offset plane
  • Ryobi
  • 755

Vezi Detalii Ryobi 755

  • 2007
  • 5
  • Five printing units;
    - Dispersion coater and UV varnishes ;
    - Doctor blade chamber for coater (UV or dispersion) ;
    - Full system of forced circulation for varnish for paint coater ;
    - Remote RYOBI PCS- G Desktop with touch screen
    remote areas of ink fountains and feed paint
    remote control of registers- longitudinal, transverse and oblique "on- line"
    remote control of humidification
    ability to save of working parameters and archiving,
    network card to cable connect with pre-press (format supports CIP)
    and output for recording on magnetic media
    - RYOBI Program Inking - software for automatic, rapid pre-inking of inking system and
    control of ink ducts during printing;
    - Software Ryobi Ink Volume Setter (CIP 4) - a combination of pre-press
    - RYOBI Smart End Inking Program - software for automatic paint stripping from rollers,
    thus preparing the machine for the next job organ;
    - PSPS Preset system - initial and basic setting of the paper size from the desktop control;
    - IPPS Preset system- preliminary and essential expression setting from the control desk;
    - Pallets delivery system on the feeder;
    - Feeder stream flow and a table with vacuum straps;
    - Kersten static electricity eliminator on applying and outputting allows printing very thin
    sheets and plastic;
    - Ultrasound monitoring of duplicate sheets, the second mechanical control system and the
    third optical inspection system;
    - The thickness of expression to 0.8 mm – cardboard version;
    - Brand panel with extensive mechanical adjust the thickness of the substrate;
    - Brand Setting panel with automatic;
    - Sound sensor by side;
    - The front airflow brands;
    - The continuous humidification alcohol RYOBI-matic-D system;
    - Ryobi-matic-D REMOTE - DELTA automatic system ON / OFF, automatically download dirt
    from the plate;
    - Automatic blanket washing (and pressure washing and software) Ryobi BCD;
    - The cooling and dampening system of solution circulation Grafix ConTemp;
    - Full tempering inking system with automatic control of temperature;
    - The oscillating roller bridge;
    - The oscillating ink form rollers (three per unit);
    - The compensation vector humidification of speed of water ductor;
    - RYOBI Full-RPC - fully automatic plate change (without bending plates);
    - Automatic washing of inking units Ryobi IRCD;
    - Ryobi Hickey Picker - manual system of contaminants removing from the plate;
    - Detectors control the flow of the sheet;
    - The system blowing the back edge of lining sheets;
    - The straightening the sheets in the delivery;
    - The Grafix Digital powder spray;
    - Extended bridge lining (version E - maximum length);
    - Drying cassette Grafix IR G55S with air-knives;
    - Support System of cooling of drying cassette system IR;
    - Drying cassette UV Mikon PUV -800 , 2 UV modules automatically opening reflectors in the
    housing coffered + air cooling system with plate a water-cooled sheet guide;
    - Densitometric control system of prints Ryobi PDS- E;
    - Counter with the function of adjusting the workload, and non-resettable odometer;
    - Control monitor machine OK;
    - Security guards, gutter oil, a set of necessary tools;
    - Anilox Cylinder for coater: 10 cm3/m2;
    - Maximum paper size: 788 x 600 mm
    - Minimum paper size: 279 x 200 mm
    - Maximum print area: 765 x 545 mm
    - Paper thickness from 0.04 to 0.8 mm (cardboard version)
    - Print speed: from 3 000 to 15 000 sheets / hour
  • 1341409
  • US$ Make an offer
  • .
  • .
  • .
  • Polonia

obtine Detalii Ryobi 755

Va rugam sa adaugati intrebarile dumneavoastra in formular pentru a obtine toate detaliile pentru 755 Ryobi