+40 735 886 201 | Despre noi | Vindeti un utilajul | Cariere | Contact



  • 1342914
  • 2004
  • Bucharest, Romania
  • Masini de tipar
  • Masini flexografice
  • E-COMBAT 430 7K UV/IST

Vezi Detalii GIDUE E-COMBAT 430 7K UV/IST

  • 2004
  • 8
  • Used Gidue Flexo printing press
    Printing possibilities: front 7/6 back 0/1
    Web Width: min. 65% of the max. web width max. 430 mm
    Print Width: max. 420 mm
    Printing Repeat: min. 203,2 mm (8'') - max. 609,6 (24'')
    Mechanical Speed: 180 mt/min
    Production Speed: 150 mt/min
    The real production speed depends on:
    - printing conditions
    - kind of material
    - print cylinders and plates repeat
    - inks and varnishing
    - kind of die cutting and shape
    Reference Web Path Drawing
    Printable Material (thickness)
    BOPP min 15my max 200 my
    PAPER min 60gsm max 200gsm
    SUPPORTED WEB min 100gsm max 250gsm
    BOARD min 100gsm max 350gsm
    Alluminum from 12 my to 50 my
    Ink Type: UV
    Plate Thickness: 1.14 mm
    Sticky Back Thickness: 0.38 mm
    Max unwind reel diameter: 1000 mm
    Diameter of the unwind shaft: 76 mm or 152 mm
    Max rewind diameter on the output shaft: 700 mm
    Diameter of the rewind shaft: 76 mm or 152 mm

    N.1 Front load unwinder with motorized roll lifting, max OD 1000 mm; both 3inch and 6inch available
    N1. Automatic Web Guide
    N1. Video inspection with manual camera movement
    N.1 Double Side Corona treater Vetaphone
    N.1 Cold foil or lamination with UV glue
    N.1 ACE double side web suction cleaner
    N.1 Combo laminator - delam / relam module
    N.1 turn bar between first and second printing module (N.1 internal color)
    N.7 UV RAY
    N.1 matrix rewinder
    N.1 Set of special idler rollers for aluminum
    N.1 Organizer (includes crane to remove and store die-cutting tools)
    N. 3 Rotary die-cutting units including:
    N.2 die-cutting modules with flexible magnetic sheet
    N.1 gapmaster for micrometric die-cutting pressure regulation
    N.2 blades for side trims with possibility to add additional blades for internal slitting
    N.2 rewinder output shafts max OD 700 mm using 2 shafts; max OD 1000 mm using 1 shaft; both 3inch and 6inch pairs available
    N.1 Pressure Roller on rewinder
    Light™: servo driven unwind shaft
    Vario™: servo driven infeed and outfeed for automatic tension control
    ARC GiDue mark-to-cylinder register control hardware and software unit
    Automatic pre-register
    Manual lateral register adjustment

    SHEETER CONVEYOR - an additional device
    KONGSKILDE MULTIAIR 2000 - bulk materials handling system
  • 1342914
  • US$ Make an offer

obtine Detalii GIDUE E-COMBAT 430 7K UV/IST

Va rugam sa adaugati intrebarile dumneavoastra in formular pentru a obtine toate detaliile pentru E-COMBAT 430 7K UV/IST GIDUE